DS-03 Dip Tester

     The Malcom DS-03 Dip Tester Measure dual wave soldering systems. Attain vital soldering performance information with just one device.


FEATURES & BENEFITS

  • The self contained DS-03 rides along the conveyor like a PCB.
  • Measures the record's maximum PCB topside preheat temperature.
  • Confirms flux and solder levels.
  • Measures and records the maximum temperature and dwell times of both solder waves.
  • Optional printer unit available.


MEASUREMENT DATA SPECIFICATIONS

    Item Sensor Measuring Range Accuracy/
    Contents
    Soldering Temperature CA sheath
    thermocouple    		 0 to 300 C +/- 2 C
    Temperature on the
    topside of board    		 CA thermocouple 50 to 300 C +/- 2 C
    Dip Time Electrode 0 to 10.0 sec +/- 0.2 sec
    Flux Dryness Electrode
    (resistance)    		    
    Flux Height Electrode 0 to 6 mm scale
    resolution
    1mm
    Solder Height Electrode 0 to 6 mm scale
    resolution
    1mm
* Specs subject to change without notice.


GENERAL SPECIFICATIONS

    Item Contents
    Cold contact point
    compensation    		 Automatic compensation with platinum temperature
    measuring resistor
    Ambient temperature 5 minutes or less OK at ambient 120 C
    Battery one(1) 9V DC Battery
    Battery life More than 10 continuous hours
    Life of sensor
    mounting plate    		 More than 5,000 times at soldering temperature of
    250 C and dip time of 5 sec
    Dimensions 94mm(L) X 230mm(W) X 51mm(H)
    Weight 840g without battery
* Specs subject to change without notice.