| Cleaning Side |
Top side of PCB |
| Cleaning Method |
Dry cleaning by adhesive rubber roller |
| PCB size |
Width: 50~250mm
Length: 75~330mm
Thick: 0.5~2.0mm |
| Conveyor Height |
910 +/- 25mm |
| Conveyor Extension |
Front: 550mm
Rear: 100mm |
| Conveyor Direction |
R->L or L->R (specify) |
| Conveyor Rail Fix |
Front or Rear |
| Conveyor Width |
Manual (Front side of system) Option: Auto movement |
| Conveyor speed |
0~9m/min (Variable) |
| Conveyor Belt |
Anti static belt |
| Anti Static (Ionizer) |
2 Bars (Entrance Top and Exit Top) |
| Air Blower |
2 Blowers (Entrace Topside and Exit Topside) |
| Roller Set Up |
Adhesive rubber roller (2 sets) |
| Front Slide Out |
Adhesive transfer roller (1 set) |
| Anti Warp Device |
2 Sets (Under rubber roller) |
| Brush Type |
Adjustable Locations
Adjustable to 30mm Lower
Automatically lower when pass mode |
| PCB Counter |
Installed |
| Buzzer |
Installed |
| Signal Tower |
Red light only |
| Safety |
Emergency Stop Switch
Inter Lock Safety for Opening Cover and Cleaning unit |
| Operation Control |
Touch Panel Program |
| Operation |
Auto Manual and Stop Signal out
Release Roller pressure when Stop or Emergency Stop
Count up to stop the system |
| Power |
AC120V |
| Compressed Air |
0.5 Mpa |
| Paint Color |
Light Gray |
