MALCOM SWB-2 AUTOMATIC WETTING BALANCE TESTER
Wetting Balance Tester for through-hole component leads. The Malcom SWB-2 Wetting Balance Tester is an automated solution for measuring the wetting force of your through-hole components using wave solder. Quickly evaluate the wettability of your component, flux, and solder.
FEATURES & BENEFITS:
- Analyzing wetting balance method for ANSI J-STD-003, MIL-STD 883, ISO 9455-16, and JIS Z 3198.
- Easy to change flux and solder.
- Computer control auto measurement analyzing test data.
- On-site testing done in under 1 hour.
- Easy-to-use analysis software.
SPECIFICATIONS:
| LOAD SENSOR | |
| Principle | Electro balance sensor (EBS) |
| Measurement ranges | 100mN - 50mN |
| Measurement accuracy | ± (0.1mN + 1 digit) |
| Resolution | > 9mN : 0.01mN < 9mN : 0.0mN |
| TEMPERATURE SENSOR | |
| Measurement ranges | 0 - 350 °C |
| Measurement accuracy | ± 3 °C |
| Insertion time | 1 - 200 seconds |
| Insertion depth | 0.01 - 20.00 mm, 0.01 mm step |
| Insertion speed | 0.1 - 30 mm/sec |
| Solder pot temperature | room temperature - 330 °C |
| Nitrogen (N2) Measurement | Option 02 concentration: > 500ppm |
| Data communication | USB port |
| Operation software | Windows 2000, XP, 7 |
| Power source | AC 115V 60 Hz |
| Dimensions | 400 mm (W) x 370 mm (D) x 550 mm (H) |
| Weight | 30 Kg |
| Computer & Monitor | Not included |
* Specifications subject to change without notice.
The Malcom SWB-2 meets international wetting balance test standards